Ramps 1.4 with Anet display and external SD card reader
Description
This Is The Wiring To Use An Anet Display With A Ramps 1.4 I Used The Marlin Configuration For The Full Graphics Reprapdiscount Smart Controller. To Get An External Sd Card Reader To Work, You Need An Detect Pin. You Have To Solder A Wire To The Socket. I Also Uploded A Cover For The Anet A3 With A Holder For The Sd Card Reader. You Have To Remove The Nuts Of The Top Two Screws. I Used This Sd Card Reader: Https://Www.Ebay.Com/Itm/2Pcs-Sd-Card-Module-Slot-Socket-Reader-For-Arduino-Arm-Mcu-Read-And-Write/381374955597?Epid=1964934917&Hash=Item58Cbb8004D%3Ag%3Ancoaaoxy4Ydtv9Ho&_Sacat=0&_Nkw=Sd+Card+Reader+Arduino&_From=R40&Rt=Nc&_Trksid=P2334524.M570.L1313.Tr1.Trc0.A0.H0.Xsd+Card+Reader+Arduino.Trs0&Lh_Titledesc=0 Adapter Wiring: Exp1:1 - Lcd:10 Exp1:2 - Lcd:8 Exp1:3 - Lcd:5 Exp1:4 - Lcd:3 Exp1:5 - Lcd:9 Exp1:6 - Exp1:7 - Exp1:8 - Exp1:9 - Lcd:1 & Sd:Gnd Exp1:10 - Lcd:2 & Sd:+5V Exp2:1 - Sd:Miso Exp2:2 - Sd:Sck Exp2:3 - Lcd:4 Exp2:4 - Sd:Cs Exp2:5 - Lcd:6 Exp2:6 - Sd:Det (7Th Pin On Socket) Exp2:7 - Sd:Mosi Exp2:8 - J3:7 Exp2:9 - Exp2:10 -
Statistics
Likes
7
Downloads
0