Stop with roller
Description
This Is A Simple Clamp With A Rubber Roller. I Made It For My 3D-Printer. *** My Settings *** Material: Abs Nozzle Diametr: 0.4 Mm Extrusion Width: 0.4 Mm Layer Height: 0.1 Mm Extruder Temp: 235 °С Heated Bed Temp: 80 °С Infill: 100% Support: No Speed: 100 Mm/S Bottom/Top/Perimetr Layers: 3/4/3 Inside-Out
Statistics
Likes
3
Downloads
0