RC plane CG balancer
Description
Simple Rc Plane Gc Balancer. Easy To Make With 10Mm Pipe. Adjustable Width. Not Suited For Biplanes. Make Sure You Print One Joint As It Is And The Other One Mirrored. It Will Probably Be Fine If Both Are The Same, But I Like It More When It'S Symmetrical. The Pipe Lengths I Used: 2X 20Cm For The Feet 2X 28Cm For The Vertical Support 1X 32Cm For The Horizontal Bar I Used Thin Double Sided Tape And A Piece Of Thin Rubber On The Aircraft Support To Make Sure The Plane Does Not Slide Off. When You Want Me To Make The Stl Files For A Different Size Pipe, Send Me A Message. You Need: -10Mm Pipe -M3 Bolts (2) Optional: -Double Sided Tape -Thin Rubber
Statistics
Likes
69
Downloads
0