Tevo Tornado Heat Bed Cable Stain Reliever
Description
Unlike Other Heat Bed Strain Relievers, This One Mounts To The Aluminum Base Plate Below The Heat Bed, Not The Actual Head Bed. This Way, Weather You Are Using Pla Or Petg You Can Use Higher Heat Bed Temps Without Melting The Strain Relief To You Heat Bed. I Would Recommend Using Petg For This So It Doesn'T Melt During Use. Four Set Screws Can Be Threaded Into The Part Without Having To Tap The Holes. To Install, Insert The Screws In The Part, Rotate The Printer On Its Y Axis And Prop It Up In That Position With The Control Box. Slide The Part On The Aluminum Base Plate, And Tighten The Screws Only Enough To Prevent The Stress Relief From Moving Around, No More. Add Zip Ties Around The Heat Bed Cables, And Then Rest The Printer Back To Level On The Table. Make Sure Your Printer Is Off And Unplugged From This Wall When You Are Installing This Part. This Part Is Not Guaranteed To Solve Any Issues With You Printer. It Will Not Make Your Printer Fire Proof.
Statistics
Likes
3
Downloads
0