Hobby Drop Saw
Description
This Is My Go At A Drop Saw. The Top Plate Has A Ruler And Degrees On It So I Printed It In Grey. Same Applies For The Degrees Stl File. The Electronics Was Sourced At Banggood: Https://Www.Banggood.Com/5Mm-Shank-M10-Arbor-Mandrel-Adaptor-Cutting-Tool-Accessories-For-Angle-Grinder-P-1148363.Html?Rmmds=Detail-Top-Buytogether-Auto__1&Cur_Warehouse=Cn Https://Www.Banggood.Com/775-Motor-Dc-12V-10000Rpm-Motor-Double-Ball-Bearings-150W-Large-Torque-High-Power-Motor-P-1233434.Html?Rmmds=Search&Cur_Warehouse=Cn Https://Www.Banggood.Com/89Mm-80-Teeth-Hss-Circular-Saw-Blade-10Mm-Hole-Cutting-Discs-Wheel-Tool-P-1077399.Html?Rmmds=Category&Cur_Warehouse=Cn The Power Connector Is A Xt60. Hardware Required: M3 X 10: X 17 (For Box Panels) M3 Nuts: X 17 (For Box Panels) M3 X 12 With Nuts: X 2 (Hinge) M6 X 30: X 1 With Nut For Handle M3 X 20 With Nuts: X 1 (For Fixing The Spring To The Box) M3 X 10 With Nut: X 1 (Fixing Spring To Handle) M4 X 25 With Nuts: X 4 (For The Degree Panel And The Mm Guide Panel) M3 X 20 With Nuts: X 2 (Locking The Xt60) M3 X 20 With Nuts: X 3 (Link Between The Handle And The Blade Guard) M4 X 12: X 2 For Motor Mount. M3 X 20 With Nuts: X 3 (For Blade Guard) Power Switch Is For A Cutout Of 13 X 19 Mm: Https://Www.Banggood.Com/5Pcs-Black-Push-Button-Mini-Switch-6A-10A-110V-250V-Kcd1-101-2Pin-Snap-In-Onoff-Rocker-Switch-P-1096122.Html?Rmmds=Search&Cur_Warehouse=Cn All Was Printed With Pla. Choose Your Infill. I Suggest Adding A Washer Between The Motor And The Handle As I Have Found The Motor Casings To Not Always Be Flat. Some Wiring Needed.
Statistics
Likes
257
Downloads
0