Bowden Extruder Chassis
Description
I'Ve Recently Upgraded My Anet A8 To A Full Bowden Extruder Setup. During This Process I Tried Out A Lot Of Chassis For The New Configuration, But Nothing Quite Fit The Needs Of My Machine. So I Made One Of My Own! It'S Designed To Use The E3D All Metal Hotend And Contains A Bracket For The Sn04 Auto Leveling Probe As Well. A Built In End-Stop For An X-Axis Chain Is Also Designed Into The Chassis And A Custom Attachment Part To Fit A 40Mm Cooling Fan For The Hotend. The Last Custom Component Is A Semi-Circle Elongated Fan Duct That Securely Attaches To The Frame With Two Screws And Doesn'T Overlap With The Bed Leveling Sensor Like Other Mounts I Tried Out. My Skynet Settings Are... Start By Using The Config File "A8- 5Buttonkeypad- Autolevel- Stock Anet Sensor" And Change These Settings For The Auto Leveling Probe Position. Define X_Probe_Offset_From_Extruder -20 Define Y_Probe_Offset_From_Extruder 10 Define Z_Probe_Offset_From_Extruder -1 Define X_Max_Pos 240 Define X_Min_Pos -20 Define Y_Max_Pos 220 Define Y_Min_Pos -10 Define Z_Max_Pos 240 Define Z_Min_Pos 0 Define Left_Probe_Bed_Position 20 Define Right_Probe_Bed_Position 210 Define Back_Probe_Bed_Position 220 Define Front_Probe_Bed_Position 30 It'S A Custom Design For My Anet A8, So It Should Work For You As Well If You Have A Similar Machine. But Like I Learned While Making This Mount, Nothing Is Guaranteed! So Play Around With It And I Hope You Enjoy It.
Statistics
Likes
20
Downloads
0