Electronic Box for CR-10 / E10 compatible Mega/Re-Arm+RAMPS+LCD2004+RPI3
Description
## Description This Is An Enclosure For Ramps1.4 + Arduino Mega 2560 / Re-Arm + Lcd 2004 Rrd + Raspberry Pi 3 This Box Was Designed To Fit 2020 Extrusion Profiles Such As Creality Cr-10 / Anet E10 3D Printers Each Part Of The Box Is A Separate Plastic Part. Print One Of Each (No Special Settings Required) Each Part Can Be Screwed Together Using M3X8 Screws. Thermoplastic Screws Are Well Fit For This Kind Of Application. ## Compatibility This Box Is Compatible With : * Ramps 1.4 * Arduino Mega 2560 Or Re-Arm 32Bits * Rrd Lcd2004 * 60Mm Fan * Raspberry Pi 2 / 3 ## What To Print Print One Of Each Stl File And You Are Ready To Go ## Updates * 2018.09.18 - Added Rsdoc Source Files * 2018.07.08: Added Lcd Facade Compatible With Ws2812 Fc-100 Rgb 5050 Led Module * 2018.07.18 : Original Post ## Your Upgrades/Updates: * A Top Cover For Mks Tft2.8 Touch Screen Is Now Available Here Http://Www.Thingiverse.Com/Thing:2196704 * (Thanks To Http://Www.Thingiverse.Com/Warlock4890) Ramps 1.4 Box Side With Cat5 Connectors Http://Www.Thingiverse.Com/Thing:1525809 ## Special Notes: * Use Thermoplastic Screws (M3X8 Are Great) * You Can Glue Each Side On The Base, It Will Increased The Box Rigidity. * There Are 2 Holes Available At The Bottom Of Bottom.Stl. These Holes Are Dedicated To Help You Glue This Part To The Base Part: Glue The Parts Together, Insert 2 Screws, Wait A Little Bit And Remove These Screws. F You Don'T Remove These Screws After Gluing The Parts Together, The Screws Will Prevent You From Properly Placing The Box On Top Of The Extrusion Profile. * 12V 60Mm Fans Can Be Found Here * Lcd2004 (Http://Www.Cr-10Upgrades.Com/En/Electronics/75-Reprapdiscount-Lcd-2004-4X20-Caracters-For-Ramps-14-3D-Printers.Html) * Ramps 1.4 (Http://Www.Cr-10Upgrades.Com/En/Electronics/74-Shield-Ramps-14-For-Arduino-Mega-256.Html) * Arduino Mega 2560 (Http://Www.Cr-10Upgrades.Com/En/Electronics/73-Arduino-Mega-2560-R3.Html) * Tmc2100 (Http://Www.Cr-10Upgrades.Com/En/Electronics/42-Tmc2100-Silentstepstick-Stepper-Motor-Driver.Html) * Tmc2130 (Http://Www.Cr-10Upgrades.Com/En/Electronics/76-Tmc2130-Silentstepstick-Stepper-Motor-Driver.Html) * Tmc2130 Spi Cable For 2 Drivers (Http://Www.Cr-10Upgrades.Com/En/Accueil/77-2-Ways-Spi-Control-Wire-For-Tmc2130.Html) * Tmc2208 (Http://Www.Cr-10Upgrades.Com/En/Electronics/43-Tmc2208-Silentstepstick-Stepper-Motor-Driver.Html) # How To Open Source File.Rsdoc? You Will Need To Download Design Spark Mechanical For This: Https://Www.Rs-Online.Com/Designspark/Mechanical-Download-And-Installation Website: Http://Www.Cr-10Upgrades.Com Facebook: Https://Www.Facebook.Com/Cr10Upgrades
Statistics
Likes
27
Downloads
0