Fan duct .tiny V6 Vulcano extension
Description
Printsetting With Extrudr Petg Infill: 30% Nozzle 210°C Bed 75°C Fan Speed: Medium Can Be Mounted With Superglue Easily! Also Can Be Mounted Removable Via: The Inner Siedunderfanholder Are Designed To Be Glued On The Airflowextension. The Fanholder Has Different Versions. I Use My One With A Seperate Holder For The Sparkcube Xl To Fix It On The Original Carriage. (The Holes For The Fan Has To Be Reworked/Or Be Drilled A Bit Larger) This Is A Fresh Project. Please Be Patient! It'S Not Finally Done. 22.07.2018: Fanholder Reworked After Failure While Slicing 22.07.2018: Fanextension Nozzle Could Be To Long, I Will Fix This In A Day Or Two. Possible Temporary Fix: Use Sandpaper To Get The Right Length
Statistics
Likes
1
Downloads
0