Digital Clock
Description
This Is A Digital Clock Enclosure For A Max7219 4X8X8 Dot Matrix. In This Project I Combined It With A Wemos D1 Mini, But Other Micro Controllers Can Also Be Used With This Case As Their Is More Room Than Required In The Enclosure. I Personally Designed This As A Clock That Works On Wifi To Show The Correct Time. This Is Of Course Not A Requirement For It To Work. This Enclosure Could Also Be Used As Just A Way To Enclose A Max7219 Display With A Micro Controller To Be Used For Different Means Than A Clock. A Nodemcu Or An Arduino Nano With Esp8266 Shield Can Also Be Used. The Lid Provides A Small Hole For Easy Installation Of A Reset Button For The Micro Controller. I Printed With 40% Infill On Both The Enclosure As The Lid For Added Strength (Since The Walls Are Not That Thick) I Think It Would Still Work Perfectly With A Smaller Amount Of Infill. Please Let Me Know If You Like It Or Your Feedback! Code: Https://Drive.Google.Com/Open?Id=1Cbpul9Tztsooet1Il99C2Vwoicdgklcq (Developed For Wemos D1 Mini)
Statistics
Likes
59
Downloads
0