Tevo tornado Dial Gauge mount for Bed leveling
Description
I Had A Dial Gauge Laying Around So I Drew Up A Mount For The Front Of The Tevo Tornado, The Mount Is Sized For 8Mm Diameter Stem. It Is Possible For The Gauge To Be Seated Securely Without A Clamp. An Easy Remove Of The Gauge Keeps The Extruder Mount A Light As Possible. With The Dial Bed Leveling Is Done In A Different Fashion. 1. Slide The Dial In All The Way. 2. When Leveling A Corner, First Get The Nozzle To Barely Touch The Build Surface. 3. Then Depending On Nozzle Size Back Away Half Of The Nozzle Size From The Build Surface. ( With A 0.4Mm Nozzle The Dial Should Read 0.2Mm Less Than When The Nozzle Was Touching The Buildsurface. 4. Repeat For All 4 Corners. 5. Recheck All Corners 4 Screws That Are 5Mm Longer Than The Original Are Needed
Statistics
Likes
6
Downloads
0