Laser Adaptor Plate, 12x30mm laser
Description
When Printing "Movable_Sled_V5.Stl", Make Sure You Have "Support" Turned On. The Bearing Holder Need The Support While Printing. They Will Beak Easily. The "Laser Adaptor Plate" Has "Chamfer'S" On One Side. This Side Is Mounted Next To The "Movable Sled". 3X13Mm Screws Are Used To Mount The Adaptor Plate To The Movable Sled. 5X14Mm Screws Are Used To Mount The Laser Holder To The Adaptor Plate.
Statistics
Likes
1
Downloads
0