PINE A64-LTS case
Description
This Is A Case For The A64-Lts Board. It Was Slightly Modified From The [Pine A64 / A64+ Computer Case](Https://Www.Thingiverse.Com/Thing:1287387). I Have Tested This With V1.2 Of The Board. The A64-Lts Board Is Slightly Different Than That A64 In That It Has The Microsd Card Slot On The Bottom (Top Has The Emmc Slot), The Microusb Power Has Been Replaced W/ A Small Barrel Jack, And There Are A Couple Switches And Leds. I Added A Small Window To Allow A Console Cable To Be Plugged Into The Exp Header. I Removed The Pine Logo From The Bottom As The -Lts Does Not Have Any Components On The Bottom, And I Didn'T Want That Much Exposure On The Case. I Also Expanded The Holes To 4Mm Diameter, Which Makes M3 Bolts Go Through Easily W/O Having To Drill Them Out. It Is Likely That You Can Use A Stand From The Original, But I Have Not Tried It.
Statistics
Likes
5
Downloads
0