Imagine That 3D - Helios // Titan Direct Drive // HCMaker 7 Cooling Fix/Upgrade Old Version
Description
**New Full Redesign Available For Testing** Https://Www.Thingiverse.Com/Thing:3299370 My Goal Was To Set Out To Use The Existing Bracket Mounting Holes Without Any Alterations To The Stock Parts I Knew A Huge Change Was Needed To Make The Printer Viable For Printing Anything Besides Pla And Even Pla Would Have Issues Printing Due To The Constant Active Cooling Fan As We Had To Plug The Cooling Tube That Hit The Nozzle. With All This In Mind I Looked At Many Variations Of Cooling Systems And Settled On This. A Creation For The Hcmaker 7 Aka Imagine That 3D Helios - Cr-10 Direct Drive Clone. Parts Requires Two Additional Fans A 30Mm Fan And A 40Mm Fan **Optional** 3 Fan Variation A Aluminum Heat Sink For Stepper Motor With A Hole In The Middle, Remove The Existing Plastic Cooling System Entirely. Further Parts Are M3 Screws And A Complete Detailed List Will Be Soon To Come After I Get The Assembly Installed. Screws 2 Flat Head Metric 10Mm Screws (I Used Two Phillips Head Screws) To Hold The 30Mm Should On, The Smaller Profile The Better. 10 M4-10Mm Metric Screws For All The Rest. 8 Screws Will Hold The Should In Place 4 For The Please Note That Holes May Need To Be Drilled To Allow For Easier Threading.
Statistics
Likes
14
Downloads
0