RileyLink Phone ToughCase

Description

Edit: V24 Was Updated To Thicken Certain Parts Of The Case. Some Printers Wouldn'T Print The Older Version. This Is A Case For The Rileylink. It Was Designed To Be Mounted On You Existing Phone Case Using 7 Small Screws (You Will Need To Drill 7 Holes In The Case). Assembly Video: Https://Youtu.Be/Zjlrrf2Pwe4 It Includes The Following Components: Rileylink Phone Case - Rileylink Phone Toughcase V24.Stl (3D Printed) Light Pipes(10 Units Per Print, Only 5 Are Required) And Selector Switch (2 Units Per Print, Only 1 Is Required) - Lightpipex10+Sw.Stl (3D Printed - Translucent) Or Rileylink Phone Case With Holes For Light Pipes Capped - Rileylink Phone Toughcase Nopipes V18.Stl (3D Printed) Screws To Fasten To Your Phone Case - 7X Flat Head M2 X 0.4 Mm Pitch 6Mm Long (Hardware) Case Was Printed In Sls Nylon Light Pipes Were Printed In Sla Translucent Resin **The Case Can Be Printed Without Holes For Light Pipes If You Don'T Want To Use Them. The Led Holes Are Covered With A Thinner Material Which Should Let More Light Out And Make It Easier To See The Light Through The Nylon. The Last File Is A Printable Drilling Template. Make Sure To Print It 1:1. Confirm The Dimensions By Measuring The Reference 10Mm Or 1In Markings On The Drawing. Assembly - Cut 5 Lightpipes And Switch From Scaffolding - Insert In The Case, Cut The Pins Flush To The Inside Surface (So They Don'T Touch/Damage The Pcb) - Insert Lipo Battery And Pcb In The Case - Drill 7 Holes In Your Case For Mounting. If Possible, Use A Countersink Drill Bit On The Inside Of The Case For The Screws To Be Flush.

Statistics

Category

Tags