DeckBox cnc
Description
A Usual Deck Of Cards Comes In A Pretty Ugly Plastic Case That Will Break Quickly If Any Force Is Applied. To Address This Problem I Designed This Simple Box And Made It Out Of A Block Of Beech Wood. In The Lack Of A Plainer, I Used Beech Plywood For The Lid. To Carve Out That Kind Of Material I Used A 6 Mm Router End Mill. With A Reasonable Step Down Of 3 Mm And A Feed Rate Of 2400 Mm/Min This Step Is Rather Quickly Done. The Other Cuts Were Made Using A 4 Mm Single Flute End Mill With Basically The Same Settings. A Little Mineral Oil Intensifies The Wood Color And Protects The Box Against Moisture. I Haven'T Tried To Print The Stl-Files But Would Be Glad To Get Feedback If They Work. Visit Https://Www.Zenziwerken.De/En/ For More Interesting Designs.
Statistics
Likes
161
Downloads
0