Riggid AR10 front sight with fiber optic and without elevation adjust
Description
After Playing With Some Of My Designs, I Have Found Out That It Can Be Adapted To More Powerful Devices Like Ar10\Mp5 This Design Uses Separate Front Sighting Pin And Can Basically Utilize Everything That Has 2Mm Mount Pin Or M3 Thread - Easily Printable - Rigid Design For Most Active Airsoft Games - Can Be Used With Any Picattiny Railed Airsoft Marker Recommended Setting Is 0.2Mm Layer Height And At Least 4 Layer Perimeters. Fill It With 15-50% Density Mount Uses M4X25Mm-M4X27Mm Screws. Warning!! This Is A Toy Accessory. Do Not Use For Hunting. Military Use Is Strictly Prohibited! Though This Design Had Been Tested With Ar15, I Do Not Recommend Using It With Real Firearms. I Did Not Implement Any Of The Safety Regulations Into This Design. This Design May Shatter During Firing And Damage Eyes Or Skin. Mushkaar_Print2.Stl - For 2Mm Front Pins Mushkaar_Print3.Stl - For 3Mm Front Pins
Statistics
Likes
8
Downloads
0