Wanhao Duplicator i3 Mini Raspberry Pi Camera Mount
Description
This Is A Camera Mount For The Raspberry Pi Camera Designed To Clip Onto The Gantry And Hold The Camera In Such A Position That You Can Easily Monitor Your Prints And Capture Timelapses. I'Ve Had This Printer For A Few Months, But Until Now I'Ve Had To Mount My Camera To The Stacked Ikea Lack Tables That I Have Acting As A Proto-Enclosure. While This Worked, Per Se, It Was A Very Hacky Setup That Didn'T Work As Well As I Would Have Liked. Frustrated With This, I Went Into Fusion 360 And ~~Stole Ideas From A Bunch Of Other Projects~~ Designed My Own Mount. Print Out Two Of The Arms And Ribbon Cable Clips. In Terms Of Other Hardware, You Will Need: * 3X M3 * 20Mm Screws * 1X M3 * 8Mm Screw * 4X M3 Nuts * 4X M2 * 8Mm Screws * 4X M2 Nuts The Printer Clip Was Adapted From [This Tool Holder](Https://Www.Thingiverse.Com/Thing:2747010) By Munce31, And The Arms Were Adapted From The Arms In This Famous [Logitech C270 Tripod](Https://Www.Thingiverse.Com/Thing:1228521) By Luc_E.
Statistics
Likes
22
Downloads
0