Dial Indicator Mount. CR10, Ender3, and others.
Description
This Is A Simple Mount To Hold A Dial Indicator, Used To Help Tram The Bed. (Or To Show How Warped It Is) Can Be Used With The [Petsfang2](Https://Www.Thingiverse.Com/Thing:2759439/) Cooling System. This Will Mount With 2 M3 X 20Mm Screws To The Std 40X10Mm Extruder Cooling Fan. Dial Mount Stem On My Dial Indicator Is 9.5Mm. It'S A Press Fit Into The Mount. It Should Work On Any Of The Cr-10 And Clones That Use A 40Mm Fan. Can Be Left In Place When Not In Use. Please Try It On Other Bots And Let Me Know If It Fits. I Will Update The Description With Any Bots That Fit. If You Need A Different Size Cutout For Your Dial Indicator Let Me Know. From What I Can Tell The Standard Di Stem Is Size 9.5Mm Or 8Mm. If You Have A Bed That Sags In The Middle Try My [Low Profile Bed Wedge](Https://Www.Thingiverse.Com/Thing:3024377) To Help Lift Up The Center. Comments Suggestions Welcome. __Update:__ Added 8Mm Stem Version __Update2:__ Added 4.75Mm Stem Version
Statistics
Likes
474
Downloads
0