SC8UU housing for sinter bushing 12x15x10mm
Description
*Note: This Is Only A Tiny Part Of My Am8 Upgrades. You Can Find The Links To The Other Parts At The Bottom Of The Description.* About ===== This Is A Housing For 12X15X10Mm Sinter Bearings. Its Bore Pattern And General Size Fits The Standard Sc8Uu Housings. It Can Be Used As A Direct Replacement When Converting From 8Mm Rods + Lm8Uu To 12Mm Rods And 12X15X10Mm Sinter Bearings. *Note: I Revised These Blocks As They Wore Out After About 6 Months. My Sinter Bushing Had A Bit Of Play Inside The Old Blocks, That'S Why I Made A New Version Based On Zipties. Now, After Another 6 Months Of Usage And Abuse They Still Seem To Hold Up. I Strongly Recommend To Use V2.* Bom ==== You Will Need These Parts Additionally To The Printed Housings. Part Amounts Are Listed For One Housing: 4X M4X10 Iso 4762 To Secure Housings On H-Plate Or Extruder Bracket 4X M4 Din 934 Nut 2X M3X5 Screws (Computer Mainboard Screws Will Fit Perfectly!) Assembly Instructions ================= 1. Push M4 Nuts Into Housing 2. Push Bearing Into Housing 3. Secure Bearings With M3 Screws 4. Mount Onto Printer 5. Have Fun :) Assembly Instructions ================= Assemble Like The Regular/Stock Am8 8Mm Rods. Version History ============ -None Yet- ------ You Might Also Want To Have A Look At: My Reinforced Z Axis With 12Mm Linear Rods Https://Www.Thingiverse.Com/Thing:2971922 My Y Axis 12Mm Upgrade Https://Www.Thingiverse.Com/Thing:3016011 My Horizontal Y Belt Upgrade Https://Www.Thingiverse.Com/Thing:2970681 The Upgraded X Axis With 12Mm Rods Https://Www.Thingiverse.Com/Thing:3016379 The Reinforced X Tensioner Using Proper Bearings And A Motor Pulley: Https://Www.Thingiverse.Com/Thing:3016345
Statistics
Likes
27
Downloads
0