Laser Saber
Description
A Simple Laser Saber That Will Bring The Force To You. In The Dark All The Blade Light Uniformly. This Was Made On Onshape The Version You See On The Picture Is The V8 Of The Drawing. Https://Cad.Onshape.Com/Documents/D9431D0B4A7Dfb1Ae9D07Bfc/W/391924A25C854Eec562Aa447/E/6F1Be762Da5E7A1901Adb1Fe I Also Designed A Cap To Fit On The Other End Of The Polycarbonate Tube Https://Cad.Onshape.Com/Documents/Cff80796E6651C9Bc6C41Dee/W/71C49E8F1972Da97A00Ded66/E/7F978E947Fdcca5Bca10032C Bom: 3X 18650 Batteries 1X3 W Led 1X12Mm Heat Sink 30 Inches Of 1 3/8 Polycarbonate Tube 1.5 Meter Of Cellophane Film 1X4W 60Ohm Resistance (Or 4X1W 240Ohm) 1Xround Toggle Button 15X2Mmx10Mm Socket Head Screw And Correponding Nut 1Xbatterie Spring 1X120Mm Of 1 Inch Galvanised Tube About 2G Of Contact Glue All Printed Part From The Bom Of The Drawing *The Steel Tube Is Used As The Ground Shown In The Electrical Drawing For The Polycarbonate Tube,1 3/8 Inch Was Good But I Think It Would Have Been More Nice With A Tube Of About 1 Inch Of Diameter
Statistics
Likes
19
Downloads
0