40mm EDF fan Replacement
Description
Designed As An Identical Replacement To The Dr Mad Thrust 40Mm Edf Fan. I Made This Model Due To Not Being Able To Find An Easily Purchasable Replacement. Printing: Bed Adhesion: Highly Recommended To Use A Brim Or Raft Style Bed Adhesion To Prevent Blades From Lifting Layer Height: Use A .15Mm Or .10Mm Layer Height For Good Resolution And Strength Support: Support Material Is Only Needed For 70 Degree Over Hang And Higher Print Orientation: Print With Back Side Of Fan On The Bed So Layers Go From Back To Front For Optimal Material Properties Print Temp: Use A Slightly Higher Print Temp Than Average To Improve Layer Adhesion For Your Filament. I Used 203Degrees For Pla As An Example Infill: Use 100% Infill To Ensure Any Internal Cavities Are Filled (None Should Be Present Just To Ensure Part Is Solid) Fan Mounts With A Single Screw Through The Front Just As The Original Edf Fan For The Dr Mad Thrust Unit. The Stl File Is Of A Ccw Version To Match Original. With A Mirror Feature In Cura Or Simulate Slicer A Cw Version Can Be Made
Statistics
Likes
1
Downloads
0