Light House Jew's Harp Case
Description
I Purchased My First Jews Harp (Jaw Harp) And It Came In A Fabric Bag Which Is Not Great For Putting In Your Pocket. It'S A Muaro Light House. I Wanted To Be Able To Protect The Striker So I Created My Own Case. Finished Weight Is Under An Ounce (28 Grams) So It'S Very Light Weight And Easily And Comfortably Fits In Your Pocket. Printing: I Try To Make My Designs So They Don'T Require Support But That Is Not Possible With This Design To Allow For The Sliding Bottom Cover. I Used Abs For This Design As That Is What I Had In The Printer At The Time. I Used Simplify 3D For The Slicing Software With These Settings: I'Ve Been Very Successful Printing Abs With An Extrusion Temp Of 230 And A Bed Temp Of 110. No Cooling For The Fist 19 Layers And Then Gradually Increase The Cooling To 10% At Layer 20 And 15% At Layer 30.
Statistics
Likes
0
Downloads
0