AS5600 Nema 17 Base
Description
Design To Put The As5600 Sensor On The Top Of The Nema 17 Stepper Motor. This Design Allow To Colocate The Motor Standing Without Any Problem With The Sensor, To Connect It, You Have To Use Jumpers Cable In The Hole. Printing: Infill: Depending Of The Use But With 20% Its Enough Layer 0.2 It'S Recommended Velocity: 40Mm/S (Petg Material) Rafts: Doesn'T Matter Supports: Only For The Screw Holes Use 4 M3X50 To Adjust The Base To The Motor
Statistics
Likes
0
Downloads
0