RAMPS cooling fan bracket
Description
This is a bracket that positions a 40mm diameter cooling fan over the Pololu A4983 stepper drivers in the RAMPS (RepRap Arduino Mega Pololu Shield). The fan used was a 40X40X20 12VDC FAN, RS Stock No. 544-0526 http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=544-0526&x=25&y=8 The fan is countersunk into the bracket and fixed in place by M3x30 socket screws. Additional holes in the corners of the bracket line up with the mounting holes in the shield board. M3 stud, coated in PTFE tube (d3D4.5) to prevent any shorts, was used to position the bracket above the shield. The fan can plug into the 12VIN and GND-IN pins just beneath D8 on the shield.
Statistics
Likes
21
Downloads
1274