Air 2
Description
MORE PRINT VOLUME: - Increased the lateral separation of 234 mm to 250 mm. - It has moved 10 mm heated platform down. - The resulting print volume depends on the platform and the extruder that we place but you can easily get a size bigger than 190 x 190 x 100 mm. MORE ROBUST: - The thickness of the acrylic has risen to 6 mm. - The introduction of a crosspiece to give more rigidity. - In the attachment points of the rods can be placed brimmed washers (DIN9021). DESING MADE CONSIDERING THE WIRING: - The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above. - Parts acrylic have holes or slots provided for wiring. ACKNOWLEDGEMENTS: Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO. SPANISH VERSION AT: http://reprap.org/wiki/Prusa_Aire#PRUSA_AIR_2.2C_Redise.C3.B1o
Statistics
Likes
415
Downloads
18254