Eric's Improved Z Axis Coupler Rev3
Description
**1/30/2021: Updated To Support A 1/4" Threaded Rod. I Haven'T Been Printing A Lot Lately, But I Had Need For One Of These. These Should Work For Prusa Remixes. Good Luck And I Hope You Find These Useful. Created In Creo Elements. **5/19/2015 Updated Ericcouplerrev3-5X5Mm.Stl For 5Mm Motor & 5Mm Threaded Rod, M5 Nut Dimensions Estimated. This Should Work For I3 Machines And Any Other Fine 5Mm Rods. Let Me Know If The Nut Needs To Be Modified. **11/4/2013 V4.2, 6Mm:** Beveled The Unsupported Edge For The 6Mm Nut, Beveled The M3 Nylock Grub Screw Hole And Narrowed It .2Mm, For A Tighter Fit. Please Let Me Know If You Need Any Other Mods. **9/1/2013 Modded V4 ->4.1:** 6Mm Version For Better 6Mm Nut Fit And Widened Grub For A Nylock Nut. Removed Opposing Grub And Widened Body To 22Mm **8/26/13 Added 6Mm And 8Mm Versions** Bridged With A Second Opposite Grub On The 5Mm Motor Shaft. **Coupler For Z Axis, Revision 3: ** Beefed Up A Little. Created In Ptc Creo
Statistics
Likes
333
Downloads
0