RC plane wing spars with integrated aileron
Description
Updated Files Loaded.. No Need For External Support On The Aileron, Makes For A 50% Faster Print. Further Revision With Increased Pin Size For Strength. As Per The Title.. 3 Parts, A Left And Right Wing Spar, With An Interally Fitted Aileron / Flap, With Hinge Pins. Made For Use With 1.2Mm Balsa Sheet On The Leading And Trailing Edges, A Balsa Beam In Adjacent The Trailing Edge As Well As A 6.1Mm Square Carbon Rod For The Centre Support. The Opening Behind The Cog Has Been Sized To Fit A 5G Servo. There Is Also A Pad On The Aileron For Mounting The Control Horn In Either A Left Or Right Hand Configuration. Heat Shrink Film Covering Is Recommended, Or Celophane With Spray Adhesive, But This Does Tend To Break Down With Uv Exposure.
Statistics
Likes
97
Downloads
0