TechZone Huxley J-Head groove mount tip clamp replacement
Description
This Is A Replacement Or The Techzone Huxley'S Tip Clamp, To Use A J-Head Hotend With Your Techzone Huxley. Based On Deuxvis' Remake Of The Tip Clamp That Was Shared On Http://Forums.Reprap.Org/Read.Php?214,102464,155495#Msg-155495 And Measurements From The J-Head Nozzle Technical Drawing On Http://Reprap.Org/Mediawiki/Images/2/26/Jhn_Nozzle_Holder_V5.Jpg. As I Understand The Comments In The Original Scad By Deuxvis, He'S Happy For This To Be Used For Anything As Long As His Comments Remain There. Update 2012-10-28: Fixed Distance Between Holes, And Thickened The Bridge By The Mount For Increased Rigidity. I'Ve Also Tested A Printed Part, And It Very Snugly. The Inner Diameter Of The Groove Mount Ridge Might Need To Be Increased Ever So Slightly, To Avoid Bending The Part Backwards. A Bit Of Sand Paper Will Probably Do The Trick If It'S Too Tight.
Statistics
Likes
37
Downloads
0