3/8 Inch Guard for Oster 76
Description
3/8 Inch Guard For The Oster 76. The 3/8 Size Breaks A Lot So I Made A Printable Replacement For My Mother (My Personal Barber). Infill: 10-15. Do Not Exceed 40% Other Wise It Will Peel Up Due To Cooling. Even 30% May Be To Much. Shells:1. Any More And You Will Have To File The Edges To Make It Fit. No Raft. It Makes The Underside Rough. Update 12/27/12: Printed V4.2 And It Looks And Works Great But Is A Little Pokey. Also This Is A Very Sturdy Piece. So For This Up Date There Is A Couple Of Different Types. On V4.4 I Made The Back Side Of The Prongs Shorter So They Won'T Hit The Scalp. I Also Made A Second Test Version, V4.5, In Which I Removed The Tip From The Front Of The Prongs Hoping It Will Lessen Scratchiness. Also In This Update I Added A Picture Of V.4.2 Guard (On The Left) Next To The Factory Guard ( On The Right). Cheers! Update 3/4/13: Printed V4.5 And It'S Most Definiatly The Way To Go! Much More Comforable On The Head. Also Added Pictures Of V4.5 (Red) Both In Use And On Its Own. Update 3/29/13 Added V5.0. This Should Be The Most Comfortable So Far With The Sight Curve In The Front But I Have Not Printed It And They Might Suffer From Overhanging Edges. Also On This Update I Took Down Some Of The Older Files (To Give The Downloads A Cleaner Look). If You Would Still Like Some Of The Old Files Send Me A Message And I Can Email Them To You. Update 4/14/13 Added Better Instructions For Printing After Trying To Print At 100% Then 50% Infill. V4.5 Still Seems The Best Way To Go. Please Let Me Know If They Work For You Or If You Make Them! :)
Statistics
Likes
104
Downloads
0