PLA Spool Mount
Description
This Is An Alternative Spool Mount For The Makerbot Replicator 1 (For Wider Spools With Smaller Holes). Just Yesterday I Visited The Http://Www.Protospace.Nl Fablab In Utrecht (Netherlands). And They Had A Lot Of Ultimaker Printers Working With Pla. And Well... The Air Was A Lot Fresher Than In My Studio When I Print With Abs. Since I Already Had A Roll Of Pla, I Decided I Wanted To Give That A Go. Sadly.. The Roll Was A Different Size Than The Ones From Makerbot. So I Figured I'D Use Some Of The Abs I Still Had Mounted To Create A New Mount. This Mount Is Much Thinner Than The Original Ones On My Makerbot Replicator 1. It Works With Rolls That Have A Hole Diameter Of 3 Centimeters (1.18Inch) And The Roll Has To Be 9Cm Thick (3.54Inch) I Included My Blender 3D File So It'S Easy To Modify The Source To Fit Whatever Roll You Need. I Printed It In Two Halves And There Are Some Small Holes In The Design To Attach The Halves Using Tie-Wraps.
Statistics
Likes
75
Downloads
0