Eckstruder Wallace Edition
Description
Note: Designed For 3Mm Filament 07-03-2015 Beefed-Up Fan Mount And Added Nut Traps To It. Ducted Fan Add-On - Thing: 899166 12-05-2014 Added New Idler That Works With Non Eckertech Hobbed Bolts. May Help With 1.75Mm. Included Modified .Scad File So You Can Adjust As Needed. I Like The Ecsktruder Better Than The Gregs, Wades, Hinged, ..... But Attaching It To The Wallace Required Some Cutting And An Extender For The Smaller J-Heads. So, I Melded The Extender To The Ecsktruder Base. Now It'S One Print And The Filament Has Less Distance To Travel. Note: The Extender Edge Is Slightly Off The Bed. The Print Worked For Me, But Your Milage May Vary. If Soemone Can Help Me Get The Plate Side Verticies Lined-Up, I'D Apreciate It. Update: Now With A Grove For Easier Wire Placement. Sorry, Still Not Fixed The Other Problem. Update 2: Moved The Hotend Mounting Holes Down! Now All The Vents On The Small J-Heads Are Exposed And There Is More Clearance Below The X-Carriage. Fixed 90% Of The Printing Problem! Also Enlarged The Hot-End Opending. Still Snug But Much Better. Update 3: Now With Recesses For The Hot-End Screws!
Statistics
Likes
30
Downloads
0