Arm Jig For Delta-Pi Reprap 3D Printer
Description
This A Jig That I Made Up For Accurately Gluing The Arm Sections Of The Delta-Pi Reprap 3D Printer. It Is Made Up Of Layers Of 3Mm Mdf, Laser Cut To House The Pivot Sections, With A Base Part To Set The Length. All The Layers Are Held Together With 8 1/8"X25Mm Bolts. Note: In The Picture The Bottom Layers Are Acrylic But That Is Not Required It Was Just What Material I Had Laying Around.
Statistics
Likes
35
Downloads
0