Warpage Reduction Gusset
Description
It'S A Gusset That Can Be Added In To Your Design To Reinforce Walls That Are Prone To Warping In A Specific Direction Due To The Design Of Your Part. I Was Dissapointed To Wake Up To A 14 Hr Print Where A Wall Had Warped In A Strange Way (The Red Part). It Actually Looks Like A Y-Axis Shift, But It Isn'T. The Other 2 Walls Are Fine. Upon Closer Inspection, I Observed That The Wall Was Collapsing Towards The Back Of The Machine And 'Recovered' Once It Reached A Larger Mass Section Giving The Appearance Of A Shift. I Fixed This One With A Dremel And Some Abs Glue. When It Came Time To Print Its Mirror Sister In Pink, I Tried Adding In Some Gussets To Support The Wall That Had Collapsed. I Used 4 Of Them Evenly Spaced. It Worked Quite Well. Sorry About The Blurry Pic. I Didn'T Check It Before I Cut The Gussets Off. This Works Well When You Know Exactly Where Your Part Is Prone To Warping.
Statistics
Likes
6
Downloads
0