External display case for 20x4 LCD Module
Description
An External Box With Stand For An Hd44780 Based 20 X 4 Lcd Display I Have Hooked To Arduino'S And Rasperry Pi'S. I Used A Sparkfun Serial Enabled Lcd Backpack Adapter And Made A Cable Entrance Hole Along With Access To The Screw Connections And Contrast Adjustment. The Lcd Rests On The Pins And Is Held In Place With Hot Glue. The Back And Stand Are Optional, And Held In Place With A Small Dab Of Hot Glue. Nothing Complicated, Just Needed A Box For The Display And I Had A Makerbot 2 To Do It. I'Ve Included .Obj Files For Your Modification Fun. I Used The Skeinforge Slicer With 20% Infill, 2 Shells And .2 Height To Create The Box In The Picture, About 3 Hrs To Print The Box On The Makerbot 2, 1 Hour For The Stand, And 30 Minutes For The Back.
Statistics
Likes
80
Downloads
0