1 1/4" PTFE Tube Cutting Guide
Description
I'Ve Been Experiencing Several Jams In My Nozzle And When I Take It Apart To Clear It Out, The Ptfe Tube Is Normally Twisted And Unusable. Having To Measure Out The Tube Each Time Is Troublesome, So I Designed This Guide To Do It For Me. I Used A Small Piece Of Metal Tube To Make Sure The Length Was Correct (By Placing It Inside The Pipe And Nozzle And Grinding It Down Until They Touched And Used That Measurement For My Tubing). There'S An Indentation Under The Hole For The Scissors To Fit Flush Against The Guide And On The Other End There'S An Access Hole To Allow You To Push The Tubing Out If It Should Become Stuck In The Guide. This Guide Is Set For 1 1/4" Long Tubes.
Statistics
Likes
4
Downloads
0