A Fully Printable Microscope
Description
Well Almost, You Still Need To Locate 4 Lenses From Some Disposable Cameras And A Light Source. For The Light Source Use An Led Or Mirror, Whatever You Have. I Used A Cheap Led Wall Light From Wal-Mart. For The Lenses, I Went To A Local Photography Shop And They Were Very Kind To Give Me An Entire Bag Full (Thank You Lens And Shutter! Http://Www.Lensandshutter.Com/). Since I Had So Many, I Designed It To Work With Them All. There Is A Different Optical Tube That You Have To Print For The Fujifilm Lenses (11.9Mm Outer Diameter) Vs. The Kodak Lenses (13.2Mm Outer Diameter). It Should Work With The Following As I Measured Them All And Will Likely Work With Others As Well: (Caution There Is A Significant Shock Hazard If You Plan To Open A Flash Camera From The Capacitor!) Fujifilm Quicksnap Outdoor Fujifilm Quicksnap Flash Fujifilm Flash Kodak Funsaver Flash Kodak Unaned Kodak Max Outdoor The Magnification Of This Microscope Is Expected Be Near 74X (Still Need To Confirm Precisely). Upgrades: Focus Lock: : Http://Www.Thingiverse.Com/Thing:85698 Smartphone Adapter: Http://Www.Thingiverse.Com/Thing:92355 This Project Was Also Inspired By This Excellent Project: Http://Www.Funsci.Com/Fun3_En/Ucomp1/Ucomp1.Htm And This: Http://Www.Thingiverse.Com/Thing:31632
Statistics
Likes
2349
Downloads
0