Mendel rotated geared extruder
Description
Based On The Trinity Extruder, But Rotated 90 So The Phidgets Stepper Does Not Foul On The X Ends Phidgets 5.18:1 Geared Stepper X 1 M4 X 50 Caphead Bolt X 2 M4 Washers X 4 M4 Nuts X 2 M3 X 8 Caphead Bolt X 4 C510 (1/4 X 1/2 X .035) Springs X 2 From Century Springs Or Similar 8Mm Trinity Labs Hob X 1 M3 Nut X 1 M3 X 25 Caphead Bolt X 1 608 Bearing X 1 8Mm X 20Mm Shaft (Or M8 X 20 Grub Screw, Or M8 X 20 Threaded Rod)
Statistics
Likes
21
Downloads
0