(prob works)Clamps

Description

Note The Status Is: Probably It Works, But I Currently Dont Feel Like Testing Or Developing It Further. If You Try It Please Provide Feedback For Others. (Be Specific) `Clamp_` And `Dry_` Are More Likely To Work Than `Tiny_`. Maybe A Tip If It Doesnt Work, Destroy The Connection Mechanism And Heat A Metal Wire Through Both Parts(With Correct Axis), And Twist Those Together. ## Clamps Clamps Inspired On [Thingiverse User Kidcrazy](Http://Www.Thingiverse.Com/Kidcrazy/Designs)'S ['Kcs' Clamp](Http://Www.Thingiverse.Com/Thing:89457). Untested. Intended Improvements Are: * Made It Parametric. * Guides To Center It. * Holes To Glue Some Filament On In Order To Hold A Regular Spring Instead Of A Plastic One. * (Optional, Parametric)Gap Behind The Teeth Improves Hold Pn Clothing. ## Potential Improvements Many; * Springs Are Not Properly Parametric(Actually Left Out The `Dry_Spring.Stl` Because It Didnt Work Well) * Assembly Could Be Easier. (That Might Mean Just Turning The Guides Off) * Parameters Based On What The User Want, And That Dont Require Fiddling To Get Right. * When The Distance Between The Prongs Is Small Relative To The Length The Handles Collide, Increasing Their Distance Would Help. * More Defaults. ## Potential Improvements Many; * Springs Are Not Properly Parametric(Actually Left Out The Dry_Spring.Stl` Because It Didnt Work Well) * Assembly Could Be Easier. (That Might Mean Just Turning The Guides Off) * Parameters Based On What The User Want, And That Dont Require Fiddling To Get Right. * When The Distance Between The Prongs Is Small Relative To The Length The Handles Collide, Increasing Their Distance Would Help. * More Defaults. ## Other As Usual Development Versions [On Github](Https://Github.Com/O-Jasper/Various_Physibles), Also Released [On Fabfabbers](Http://Www.Fabfabbers.Com/Models/Id/140/Dry-By-O-Jasper).

Statistics

Category

Tags