Vertical Lift Bracket for The little bolt hobbit
Description
Instead Of Pivoting Your Dremel To Meet The Bolt, Use These Brackets To Attach Your Tool To The Little Bolt Hobbit Allowing You To Slide Your Dremel Directly Up And Down To Meet The Bolt. It Should Make It Easier To Line Up Your Cutting Wheel To The Center Of The Bolt, And In Theory, Make A Slightly Thinner Cut. Modify The Settings In The Scad File To Match Your Dremel Holding Mount'S Bolt Spacing And You Can Customize The Overall Length, Width And The Channel Width Where Your Bolts/Screws Slide In Too. These Files Are Only For The Extension Brackets. They'Re Designed To Use With The Little Bolt Hobbit By Elk, Found Here: Http://Www.Thingiverse.Com/Thing:23717 I Came Up With This Idea Because I Had To Make Cuts At Every Other Tooth For A Total Of 16 Cuts With The 32 Tooth Wheel Because The Cutting Discs I Use On My Dremel Are A Little Too Thick To Allow 32 Cuts On A M8 Bolt.
Statistics
Likes
1
Downloads
0