Sunhokey I3 12mm Inductive Sensor Adapter V2
Description
This Is An Improved Version Of Www.Thingiverse.Com/Thing:1029784/#Files Featuring 4 Adjustment Bolts Allowing For More Accurate Height Adjustment Of The Inductive Sensor. Also, The Tip Of The Sensor Has To Be Level I.E. Parallel To The Build Plate, Which Can Be Done With The Adjustment Bolts As Well. If The Tip Of The Sensor Is Not Parallel To The Build Plate, It Might Collide With The Printed Workpiece Resulting In Step Losses. You Will Need 4 M3 Bolts (>30Mm) And Nuts, As Well As 4 Strong Springs To Fit Over The M3 Bolts. 2 More Screws/Bolts Are Needed To Secure The Upper Part To The 40Mm Hotend Cooling Fan. The M3 Nuts Can Be Heated Up To Drive Them Into The Captive Nut Pockets Of The Lower Plate (The One The Sensor Mounts To).
Statistics
Likes
9
Downloads
0