Compact E3Dv6 Dual blower fan mount
Description
This is a compact dual blower fan mount for the E3Dv6 hotend (heatsink) with a *quick-remove nozzle* for cooling down your prints fast afterwards! I had been using [this fan mount](https://www.thingiverse.com/thing:1746358), but the form factor didn't really [mesh with my setup](https://i.imgur.com/3eW5M30.png). This mount has the heatbreak and layer fans neatly side-by-side, fastened using a single screw, keeping the width down. (That's my [bidirectional filament runout sensor](https://www.thingiverse.com/thing:2472086) for the Titan extruder in the pictures, if you were curious.) If there's interest for different nozzles, let me know! You can also design one yourself, using the existing nozzle mount as a base. ---- You will need: * Two 12V blower fans (50x15mm), as pictured. Cheap on [Aliexpress](https://www.aliexpress.com/wholesale?SearchText=blower+fan+5015). * A loooong 35mm M3 screw (or M4, or anything that'll fit through the 4.5mm diameter hole on the blower fans. Maybe even a zip tie!) * A nut for the long screw * Optionally, a 10mm M3 screw for securing the nozzle to the fan mount (Though the nozzle should be a press-fit, and it may be safer to have it detach on collision) * Optionally, a zip tie for securing the fan mount to the E3Dv6 heatsink (it should be a press-fit)
Statistics
Likes
11
Downloads
0