Another Lab plate vortex/shaker from a 140 mm fan
Description
Remix from [WaveSupportAparatus' design](https://www.thingiverse.com/thing:1660555). Changes from original: 1) Spring mount remodeled. Spring side has a draft to help insert the spring and has an indentation to help fix it. 2) Spring mount has a M3 compatible hole for screwing the fan, and the Base has a pin to insert the mount. You can use glue to fix it in place. 3) Base has the pin described above, and has a place to insert 14x9x12mm rubber feet underneath using M3 screw. 4) Base has a support for the 12v connector and for a potentiometer. 5) Base has a central place to hold a ballast (I'd use lead) and there is a 3d model for the cover. 6) Table has a tight fit to a 5 1/4", 96-well plate, so you don't need an adherent surface for this plate. 6) Table has a higher wall to hold more stuff. I tried to keep it as light as possible. Electronics: 1) 140mm fan 2) 12v conector (12mm diameter mount) 3) 470 ohms potentiometer (10mm diameter mount) Please refer to the [original model](https://www.thingiverse.com/thing:1660555) for further technical details. [Video from current project](https://photos.app.goo.gl/kIy1M0gMUrcfh73F2)
Statistics
Likes
103
Downloads
0