RasPi Zero 3.5 LCD Stand
Description
Design Tools: DS-Mech Printer: Makerbot Rep5th Rafts: Yes Supports: No Resolution: Z:0.15mm; Nozzle: 0.4mm Infill: 50% Rectilinear I set the screen resolution of Raspi Zero W to 720x480 and use it now. The LCD down converts to 480x320 of the native resolution. The touch panel can be used by installing an appropriate driver provided by the manufacturer. I used a 7cm short cable of mini HDMI type-C(plug) = HDMI type-A(socket) for HDMI connection. Remove the socket cover for the type-A side connector for thinning. RasPi 3.5 LCD Stand is here: https://www.thingiverse.com/thing:2546459 If you do not need wall mount, LCD_Stand_B - 01 parts can be used. The height of the LCD support is reduced a little.
Statistics
Likes
17
Downloads
0