RF100 better cable routing
Description
It happens that the upper cable to the extruder breaks. What happened to me. I ordered the replacement cable from the manufacturer and didn't want to install it in the same position again. First I removed the old cable, that's a bit tricky but no problem. I drilled a hole in the bottom right back of the cable with about 15mm-20mm and laid the cable in a nice big bend. The cable is held by my clip. I hope the problem with the cable is solved. Link to the cabel https://www.conrad.de/de/kabelbaum-passend-fuer-renkforce-rf100-1522166.html
Statistics
Likes
8
Downloads
0