Anet A8 Raspberry Pi rear mount improved
Description
Raspberry pi mount for Anet A8, this version is fixed on the rear of the LCD screen, replacing the old acrylic piece. You will need a 40mm fan like this one : https://www.amazon.fr/TOOGOO-Boitier-Refroidisseur-ventilateur-refroidissement/dp/B00EDMJGLK/ref=sr_1_1?ie=UTF8&qid=1532435161&sr=8-1&keywords=40mm+fan and also thermic dissipators like these (not compulsory but recommended, the pi heats very hard using Octoprint) : https://www.amazon.fr/Aukru-Dissipateur-chaleur-Raspberry-aluminium/dp/B00ILK6DMA/ref=sr_1_2?s=electronics&ie=UTF8&qid=1532435241&sr=1-2&keywords=dissipateur+raspberry+pi+3 I have made many tries before my Pi fits in the box^^ But now it's perfect! Don't forget to unmount the SD card before installing and mounting it by the hole on the side. I have made this to make all displays accessible from the below of the case, so it doesn't add any height to the printer and you can also use a screen or other in an enclosure which fits perfectly the original height.
Statistics
Likes
40
Downloads
0