Wine Glass Marker Set
Description
Update 2020-04-16: Added a bigger storage plate and nut to be able to fit the bigger nuts. The reason being this: If you had picked your marker and ring, then put the rest of the rings (that you don't use) back on the peg and screw back the nut. The unused rings could still fall off the peg if someone tuned the plate up side down. With the bigger nut's that can not happen. :) I like the idea with a marker on the wine glass. However when you have a couple of glass, your memory may not be so sharp any more. So, what color did you have on your marker? Aha, that's why you have the ring on your finger! Problem solved. Your glass marker has the same color as your ring. :) In the set there are for the moment 6 sizes of the ring. 15-20 mm. I think that should cover it. The Storage Plate has 16 pins for marker sets. And then a nut on top to keep the sets from falling off the pins, there is also a small hole so you can "hang" the sets on the wall. :) When taking a set, just unscrew the nut of your set you want, choose a ring that fits and mark your glass. Enjoy... :) I have used singles colored markers to keep the rings as "thin" as possible. But I have also included the Fusion 360 files, so you can make your own version! :) The print: https://youtu.be/xMzOSe6jqPk Ps: The Storage board is quite a long print...
Statistics
Likes
20
Downloads
0