Promega Z Probe Redesign
Description
This is a redesign of the Z Probe rig for the new Promega from M3d. The one that came with the machine was anemic and broke immediately. This was designed parametrically in Fusion 360, and I've included the Fusion file, so it can be configured for different switches, tolerances, etc. It uses the original 3 magnets to register position, but the settings are there to use different magnets or switches as needed. I used a small 6/32 screw to lock the slider in place. You will also need 2 very small screws to affix your Z switch.
Statistics
Likes
19
Downloads
0