Wall Mount for Ownboard / Meepo Boards
Description
A wall mount designed to hold an E-Skateboard with Trucks found on Ownboard and Meepo Boards. The design is rather beefy and holds my board (Ownboard with Sanyo Batteries and 30" deck) that weighs about 7-8kg without a problem. I guess it would handle some additional kgs depending on infill etc. I used 4.5x25mm Torx (T25) screws and in my case two screws were sufficient. You might want to use a third one if you have a heavier board. The Mount on the photo is the predecessor of this design and thus looks a bit less refined.
Statistics
Likes
27
Downloads
0