Repetier auto-level 0.92.9 for DMY3DP-001 (p802m / anet a8 clone)
Description
All files are on github : https://github.com/crazytiti/Repetier0.92.9-DMY3DP This is preconfigurated repetier firmware 0.92.9 with auto level for DMY3DP-001 3d printer (anet a8 clone with modified melzi electronics) It use the bed sensor to auto level and correct distortion. Be aware on first use ! You must check if the head will scratch the bed. To adjust the first layer height you must adjust Z_Probe_height in eeprom settings accordingly to your printer. Use repetier host to adjust eeprom settings. The starting G-code must contain : G28 ; home X and Y (Z homing disabled in firmware) G1 X10 Y10 Z10; going out of parking pos G32 ; auto bed level Repetier To compile it you need to add the sanguino board to arduino : Add this board manager to your arduino : https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json See full explanation on https://github.com/Lauszus/Sanguino To upload it you may need and ISP to put the arduino bootloader on your board, then use classic arduino USB upload. Demo : https://youtu.be/xS7Vn1HkF7k
Statistics
Likes
8
Downloads
0