Monoprice Mini Delta Shield / Filler Plate
Description
This filler plate is created to snap on to the interior of the Monoprice delta 3d printer leg area to fill and cover the gap at the base of the control arms. The plate can be scaled in your slicer of choice to make of for any shrinkage depending on the PLA brand your using. If using ABS it will need to be scaled up to account fro shrinkage. For best results if printing on your Delta use the following settings: Fine 0.1 resolution Layer height 0.1 Top/bottom height 0.4 Wall / top thickness 0.8 Infill 20% Print temp 180 Bed temp 50 Flow 95% Retraction distance 4, speed 60 Print speed 60 (if using a glass plate, adhesion - skirt)
Statistics
Likes
38
Downloads
0